New-build homes
Modern stripe and plain runners with brushed nickel rods — a recurring point on Rochester surveys near Rochester High Street.

Borstal is a semi-rural suburb with a mix of Victorian and inter-war housing below the North Downs; stair runners spec here is written around Victorian terraces, inter-war semis, bungalows.
Working in Rochester means working off the A228 corridor, with commercial activity around Medway City Estate and family streets across Borstal and Wouldham. Rochester (ME1) is a historic cathedral city with a real mix of period and modern property, and that shapes what stair runners actually has to do here. Georgian townhouses in Borstal need a different approach to commercial units around Medway City Estate, and we spec both weekly.
Modern stripe and plain runners with brushed nickel rods — a recurring point on Rochester surveys near Rochester High Street.
Bound wool runners with brass rods that suit Victorian and Edwardian staircases — noted on jobs across Wouldham and Cuxton.
Hard-wearing twist runners that handle suitcases and high turnover — we see this most in the ME1 district, particularly Horsted.
Because Rochester is a historic cathedral city with a real mix of period and modern property, the same stair runners job looks materially different across Borstal, Wouldham, Cuxton. Older properties towards Borstal often need latex smoothing before any stair runners goes down; newer stock around Horsted is usually a straight lay once we've moisture-tested the slab.
Access-wise, Rochester works well for us: 1 miles from Chatham, off the A228 corridor, with our vans running past Medway City Estate most weeks and Corporation Street on the commercial rota. That matters for serving your local area jobs — we can drop samples, run a re-measure, or bring an extra length of stair runners the same day.
Because Borstal sits 2 miles from Rochester, we treat it as part of the Rochester run, not a separate area — stair runners surveys here get the same next-day window and the same fitters as central Rochester.
Rochester's subfloor mix — Georgian townhouses and Victorian terraces on the older streets, screed on the newer ones — means our stair runners spec adapts room by room. We survey with a moisture meter, note edge conditions in Borstal, and photograph anything unusual so nobody's surprised on fit day.
Timing-wise, Rochester works best for us if the survey lands early morning — traffic through Medway City Estate and along A2 tightens by mid-morning. Delivery for larger stair runners runs into Borstal tends to work on the earlier slot, whereas smaller lifts around Wouldham are fine any time.
Beyond the town centre, we regularly quote stair runners out towards Aylesford — same Kent team, same warehouse pricing, same paperwork. If your Rochester address sits on the ME1 edge, that's still inside our service radius.
Stair-by-stair measure, photograph and rod placement agreed — a recurring point on Rochester surveys near Rochester High Street.
Runner samples brought to site against your decor — noted on jobs across Wouldham and Cuxton.
Runner cut and bound to width, with matching rods if needed — we see this most in the ME1 district, particularly Horsted.
Underlay, grippers, runner and rods fitted by stair specialists — a repeat pattern on 1930s suburban semis around Cuxton.

Yes — spindle staircases are one of the trickiest fits and we do them every week across Rochester. The runner is cut to width, bound on both edges and tucked carefully behind each spindle.
A standard 13-step staircase with a small landing is a full day for the fit, plus a few days lead time on the bound runner itself.
We usually recommend leaving 50-75mm of stair tread showing on each side. We mark it up with you on the survey so you can see the proportions before ordering.
No, they're optional. They add a finished look and traditional feel, but they don't structurally hold the runner — the underlay, grippers and stretching do that.
Yes — the whole ME1 postcode and surrounding districts are part of our standard Rochester service area, no travel charges.
Final word: if you want stair runners in Rochester done once and done properly, you want an in-house fitting team with a stocked warehouse — that's us. For Rochester addresses out towards undefined, expect the same response time and the same fitters.
We come to you across ME1, measure, sample and quote — all free, all written. We're regularly in undefined and across the ME1 district.
Book a survey