New-build homes
Modern stripe and plain runners with brushed nickel rods — noted on jobs across Tankerton and Tankerton.

stair runners supplied and fitted by one Kent team in Whitstable. No retailer-vs-fitter blame loop, free survey covering Swalecliffe.
Working in Whitstable means working off the A290 corridor, with commercial activity around High Street and family streets across Tankerton and Seasalter. Buying stair runners from a shop and finding your own Whitstable fitter is one route — ours is faster: stocked materials, in-house fitters, fixed quote, fixed date.
Modern stripe and plain runners with brushed nickel rods — noted on jobs across Tankerton and Tankerton.
Bound wool runners with brass rods that suit Victorian and Edwardian staircases — we see this most in the CT5 district, particularly Seasalter.
Hard-wearing twist runners that handle suitcases and high turnover — a repeat pattern on small hotels around Chestfield.
Because Whitstable is a coastal town with weatherboard cottages, busy holiday lets and a strong hospitality scene, the same stair runners job looks materially different across Tankerton, Seasalter, Chestfield. Older properties towards Tankerton often need latex smoothing before any stair runners goes down; newer stock around Swalecliffe is usually a straight lay once we've moisture-tested the slab.
Whitstable's High Street and High Street generate a lot of our commercial stair runners work; the residential side is heavier around Tankerton and Seasalter. Because both are on our weekly route, an supplied and fitted under one roof conversation in Whitstable rarely needs a second van visit.
Supplying and fitting stair runners ourselves for Whitstable customers means the same team handles the moisture reading in Tankerton, the delivery to Seasalter, the fit, and the sign-off. One point of contact from the High Street showroom through to the last threshold bar.
Prep in Whitstable is where quotes go astray if the surveyor rushes. On weatherboard cottages in Tankerton we plan 24 hours of latex cure into the schedule; on the modern estates around Swalecliffe it's typically a same-day lift-and-lay. That difference belongs on the quote, not in a phone call halfway through the job.
Access for stair runners in Whitstable is rarely the same twice: parking near Tankerton can mean a permit, the run in from Herne Bay adds 10 minutes at peak, and lifts in the flats around High Street need booking. We handle the logistics; you don't have to.
From the High Street end of Whitstable out to Swalecliffe and the Faversham boundary, our stair runners work here is week-in, week-out — not a one-off drive-out. That's why the price and the process stay consistent.

Stair-by-stair measure, photograph and rod placement agreed — noted on jobs across Tankerton and Tankerton.
Runner samples brought to site against your decor — we see this most in the CT5 district, particularly Seasalter.
Runner cut and bound to width, with matching rods if needed — a repeat pattern on small hotels around Chestfield.
Underlay, grippers, runner and rods fitted by stair specialists — worth flagging for Whitstable properties off the A290.
Guide-only — every Whitstable property is surveyed so the written quote reflects subfloor, access and prep on the day.
Our warehouse is roughly 5 miles from Herne Bay via the A290.
Most Whitstable surveys are booked within 48 hours of your enquiry. We cover all of the CT5 district from our local warehouse.
Most Whitstable stair runners jobs price by room — typical mid-size rooms come in at a known range, but prep on older properties is where the variation comes in. Our survey itemises both, so the headline figure includes everything we'd actually do.
We usually recommend leaving 50-75mm of stair tread showing on each side. We mark it up with you on the survey so you can see the proportions before ordering.
A standard 13-step staircase with a small landing is a full day for the fit, plus a few days lead time on the bound runner itself.
Yes — spindle staircases are one of the trickiest fits and we do them every week across Whitstable. The runner is cut to width, bound on both edges and tucked carefully behind each spindle.
Pulling it together — stair runners for Whitstable from a team that lives and works in Kent, covering Swalecliffe and the wider CT5 area without travel charges. For Whitstable addresses out towards Tankerton, expect the same response time and the same fitters.
One team, one invoice, one warranty. Stock held at our Medway warehouse — fast turnaround. We're regularly in Seasalter and across the CT5 district.
Start your project