Installation & logistics · Herne Bay, CT6
Old floor uplift and disposal explained for Herne Bay properties, from initial assessment through to licensed waste transfer.
Waste regulations apply to flooring uplift just as they do to any other construction waste, so what comes off the floor cannot simply be bagged and put out with household rubbish once volumes go beyond a small offcut or two.
On commercial fits close to Sea Street, offcuts and old flooring generally have to be off the premises by the end of the same working day. We build removal and access for a disposal vehicle into the programme from the outset, rather than leaving bagged waste stacked by a fire exit overnight.
Where a suitable recycling route exists, materials such as clean timber, carpet tile and certain vinyl products can be diverted from general waste. Availability varies by material and location, so this is confirmed with the waste carrier rather than assumed for every job.
Remove stair and landing material by hand rather than dropping it, to avoid damaging treads or walls.
Set aside clean timber, carpet tile or other recyclable waste where a suitable local route exists.
Keep a record of what has left site and where it has gone, in line with duty of care obligations.
Ground-floor flats across Herne Bay sometimes share a communal hallway that other residents still need to use freely while a fit is going on, so protection boards go down along that route before any material is carried through, not after the first roll of new material has already scuffed the paintwork badly along that shared communal route used daily by neighbours.
Managed and Canterbury City Council housing with communal bin stores and shared access paths means waste removal from a fitting job has to be coordinated with a specific, agreed collection point on site, rather than simply being left loose at the nearest kerb once the old flooring has finally been pulled up.
Before fitting proceeds, the exposed subfloor is swept or vacuumed clear of debris and checked for any remaining adhesive, fixings or loose material, so the new floor is going onto a genuinely clean and stable surface rather than one that still carries traces of what came before.
These are our own installations in the county. They illustrate the type of work covered on this page rather than a particular job.
No handover between separate contractors, our own fitters manage removal through to the finished floor.
07702 737267Postcode district CT6, Canterbury City Council.
We reach Herne Bay via the A291, and cover the wider CT6 district as part of our normal round.
Where possible, uplift is scheduled around trading hours and fire exits and loading access are kept clear throughout, though this depends on the scale of the works and the layout of the unit.
Clearing small items, ornaments and wardrobe contents in advance helps uplift run smoothly, and flagging anything you know about the age or history of the existing flooring is genuinely useful.
At survey, the type and area of existing flooring is assessed against typical volumes for that material, giving a reasonable estimate of what needs collecting and how it should be scheduled.
Yes, waste transfer documentation is kept in line with duty of care obligations, covering what has been removed and where it has gone.
The subfloor is left clean, fixing-free and ready to inspect properly once your old floor has been taken up, whatever was on it before.
No handover between separate contractors, our own fitters manage removal through to the finished floor.