Room by room · Sittingbourne, ME10
Fitting a utility room floor in Sittingbourne? We supply waterproof vinyl and LVT rated for appliance weight and moisture.
Guest rooms above garages near Eurolink Industrial Estate and off the A249 often have their own separate entrance and their own subfloor, so treating that annexe room as part of the main house survey can miss a step.
Utility rooms are usually smaller than kitchens but often work harder pound for pound, running a washing machine, tumble dryer and sometimes a chest freezer on a floor that also has to survive the occasional hose leak or overflow without the damage reaching the subfloor beneath.
Flooring is coved or sealed up the wall around appliance and sink areas where appropriate.
Appliances are put back in place with anti-vibration feet checked and adjusted.
Washing machines, dryers and freezers are isolated and moved clear before old flooring is lifted.
| Flooring type | Water resistance | Appliance load tolerance | Grit/mud resistance |
|---|---|---|---|
| Sheet vinyl (welded) | Excellent | Good with solid subfloor | Good, easy to clean |
| Glue-down LVT | Very good | Very good | Good |
| Safety flooring | Excellent | Good | Very good, textured |
Many {town} utility rooms sit on a solid concrete slab, sometimes as a former garage or lean-to converted into a laundry space. Older slabs in these areas can carry residual damp or an uneven surface left by a previous garage floor finish.
A moisture check and a levelling screed or compound are usually worth budgeting for in a converted space before any waterproof floor covering goes down, since a damp reading missed at this stage can undermine adhesive bond and cause failures under appliances later.
Postcode district ME10, Swale Borough Council.
Spare rooms used for storage in Murston often sit untouched for years, and when they're finally cleared the floor underneath can be in worse condition than any room still in daily use.
We reach Sittingbourne via the A249, which matters for room-by-room jobs: deliveries land when the room is cleared rather than days early, and returning to adjust a threshold stays quick.
In-house fitters handle appliance moves and sealing as part of the job.
07702 737267
Images show our own flooring work across Kent. Photographs are illustrative of the type of work described, not of a specific customer address.
We reach Sittingbourne via the A249, and cover the wider ME10 district as part of our normal round.
It can be, particularly if the room is used with wet feet or as a boot or dog-washing area, since the textured surface gives better slip resistance than standard vinyl.
Generally yes, washing machines and dryers are disconnected and moved out of the room so the floor can be fitted underneath and then the appliances reconnected.
Usually, once the concrete slab has been checked for moisture and levelled where needed, since older garage floors sometimes carry residual damp or an uneven surface from a previous finish.
A raised or sealed threshold at the doorway acts as a physical barrier, and sealing the flooring tightly to the frame reduces the chance of water tracking sideways under the door.
Getting seams welded and the subfloor level in Sittingbourne keeps a utility room floor sound under years of washing machine cycles.
In-house fitters handle appliance moves and sealing as part of the job.