Hallways
Hardwearing brushed and oiled oak that scuffs gracefully.

Strood's local engineered wood specialist. Samples to your door, latex screeding included, Temple Marsh and Higham and surrounding ME2 addresses covered.
Engineered Wood Flooring sounds simple until you start lifting old coverings in a Strood property and find the kind of subfloor that needs real prep. That's where a lot of cheap quotes fall apart. We've fitted engineered wood all over Strood, from Riverside developments to commercial spaces near Temple Marsh, and we cost prep in honestly from the start.
We focus on doing the boring bits properly — subfloor prep, accurate measuring, scribed cuts and clean handover — so the engineered wood you can see is the part that lasts.
Every Strood property is different. These are the things we always check before quoting your engineered wood:

Moisture testing of subfloor and skirting condition check.
Boards delivered and left in the room for 7-10 days.
Ply boarding or latex screed to give a perfect base.
Glue-down or secret-nailed boards laid in plank or herringbone format.
Skirting refit, threshold bars and a maintenance oil if requested.
Hardwearing brushed and oiled oak that scuffs gracefully.
Wide engineered planks that stay stable over large spans and UFH.
Real-wood look that suits original features and can be refinished for decades.
Strood has a real mix:
We stock and fit the ranges that actually perform — chosen for Strood properties and the way they're used.
As well as central Strood, our engineered wood fitters regularly cover:
Our warehouse is just 1 miles from Strood via the A2. Samples, surveys and aftercare are all genuinely local.
A typical 30m² room in Strood is around 3 days including acclimatisation, prep, fitting and trim. Herringbone takes longer.
Yes — sample boards are brought to your Strood address at the survey, and we keep a board library in our Gillingham warehouse.
It has the same real-wood top layer but a stable plywood core underneath, which is why it handles modern heated subfloors and humidity changes far better than solid wood.
Yes — engineered wood is the recommended real-wood option over UFH. We glue down and commission the heating gradually to avoid any board movement.
Lacquered is lower maintenance and very hard wearing. Oiled looks softer, ages beautifully and any deep scratches can be spot-repaired without refinishing the whole floor.
A flavour of jobs we've completed in Strood and the surrounding ME2 area.



Bottom line: real Kent engineered wood fitters, real subfloor prep, and a local presence across Strood and Higham that means we're back quickly if you ever need us.
Book a free engineered wood measure across Strood and the ME2 area. Samples to your door, prep included in the quote.
Get a quote