Winder and spindle stairs
Careful pattern matching on tricky winder treads and around spindles.

Whitstable's local stair runners specialist. Samples to your door, latex screeding included, Tankerton and Swalecliffe and surrounding CT5 addresses covered.
Stair Runners sounds simple until you start lifting old coverings in a Whitstable property and find the kind of subfloor that needs real prep. That's where a lot of cheap quotes fall apart. We've fitted stair runners all over Whitstable, from Weatherboard cottages to commercial spaces near Whitstable Harbour, and we cost prep in honestly from the start.
We focus on doing the boring bits properly — subfloor prep, accurate measuring, scribed cuts and clean handover — so the stair runners you can see is the part that lasts.
Whitstable has a real mix:
Careful pattern matching on tricky winder treads and around spindles.
Modern stripe and plain runners with brushed nickel rods.
Bound wool runners with brass rods that suit Victorian and Edwardian staircases.
We stock and fit the ranges that actually perform — chosen for Whitstable properties and the way they're used.
Every Whitstable property is different. These are the things we always check before quoting your stair runners:

Stair-by-stair measure, photograph and rod placement agreed.
Runner samples brought to site against your decor.
Runner cut and bound to width, with matching rods if needed.
Underlay, grippers, runner and rods fitted by stair specialists.
Our warehouse is just 5 miles from Whitstable via the A299 Thanet Way. Samples, surveys and aftercare are all genuinely local.
As well as central Whitstable, our stair runners fitters regularly cover:
A flavour of jobs we've completed in Whitstable and the surrounding CT5 area.



We usually recommend leaving 50-75mm of stair tread showing on each side. We mark it up with you on the survey so you can see the proportions before ordering.
Yes — spindle staircases are one of the trickiest fits and we do them every week across Whitstable. The runner is cut to width, bound on both edges and tucked carefully behind each spindle.
No, they're optional. They add a finished look and traditional feel, but they don't structurally hold the runner — the underlay, grippers and stretching do that.
A standard 13-step staircase with a small landing is a full day for the fit, plus a few days lead time on the bound runner itself.
Yes — all our Whitstable runners are professionally bound to width in either matching or contrast tape, with woven herringbone binding available too.
Next step: we book a free Whitstable stair runners survey, bring samples, measure up and quote. Same goes for nearby Swalecliffe — it's all part of our regular Kent coverage.
Book a free stair runners measure across Whitstable and the CT5 area. Samples to your door, prep included in the quote.
Get a quote